General Specification  General Specification

 - All control equipment is mounted within a sheet steel
   enclosure, with a minimum protection rating of IP54, suitable
   for wall/floor mounting, with front access only required.
   All panels are supplied with lifting eyes to ease
   transportation to the machine room. Encapsulated diagrams
   and manuals are supplied in an internally mounted
   document pocket.

 - The control system operates from a supply of 110VAC
   (optionally 240VAC) with the main control gear being
   selected from the Telemechanique 'Tesys' range with silver
   to silver contacts.

 - Main contactors are rated to AC3 duty plus a minimum of
   10% for inching duty, and internal panel wiring is via
   tri-rated cable to BS6231 or optionally using LSZH cable.

 - Shrouded pattern terminals prevent direct finger contact,
   and when fitted, resistors are mounted externally in
   IP20 enclosures to give optimum heat dissipation.

 - All electronics, hardware and software, utilised with our
   control systems are produced in house, designed by our R+D
   team of engineers with manufacturing via our PCB
   department.

Midiflite  Midiflite

 - Control System - FAPB, Down collective, non-selective
   collective, traction or hydraulic.
 - Motor Control - Traction : single speed, two speed,
   VVVF (to 1mps).
 - Enclosure - IP54 wall mounting.
 - No. of floors - 4 max, single entry car, option for through
   car non-selective door operation.
 - Operating voltage - Control circuit 240 or 110VAC
   Pushbuttons, indicators etc 24VDC
   Suitable for various Brake, Ramp and Valve Voltages
   All inputs and outputs are fully opto-isolated.
 - Floor selection - Microprocessor switched via tapehead
   or proximity switches with terminal limits as backup.
 - Door operation - Suitable for both manual doors and
   power operated doors.
 - Indicators - Outputs for 24VDC Lift Coming or Call
   Accepted Indicators. DDA signals. Position Indicators and
   Direction Arrows. Lift Here and Out of Service indication
   is optional. Gate open warning system for manual gate
   installations with 24VDC buzzer supply.
 - System Features - 110% overloaded with 24VDC output
   for indicator. Homing, Fire Control (not firefighting),
   Service Control.

Interflite  Interflite

 - Drives - Single, Two speed, traction, hydraulic, DCVV,
   VVVF.
 - Control System - APB, Down collective, full collective,
   non-selective collective. Single board will control up to
   8 floors Full Collective or 12 Floors Down Collective,
   non-selective collective or APB.
 - Door operators - Suitable for all types of door operator
   both AC and DC. Also suitable for manual or swing type
   door operation.
 - Enclosure - IP54(min) Wall or Floor mounting.
 - Operating voltage - Control circuit 240 or 110VAC.
   Pushbuttons, indicators etc 24 VDC. Suitable for various
   brake, ramp, and Valve Voltages. All inputs and outputs
   are fully opto-isolated.
 - Floor Selection - Microprocessor switched via tapehead or
   proximity switch with terminal limits as backup.
 - Indicators - Outputs for 24VDC Lift Coming or Call
   Accepted Indicators. Position Indicators and Direction
   Arrows. Hall lanterns and Arrival Gongs. Lift Here and Out of
   Service indication is optional. Gate open warning system for
   manual gate installations with 24VDC buzzer supply.
 - System Features - 110% overloaded with 24VDC output
   for indicator. 90% bypass, Homing, Fire Control, Service
   Control, Emergency Recall, Standby Generator operation,
   DDA signals.

Skycom  Skycom

 - Drives - Single, Two speed, traction, hydraulic, DCVV,
   VVVF, SCR, MRL
 - Control System - APB, Down Collective, Full Collective for
   32 floors. Flexibility allows boards to be added for the
   required number of floors. Group operation available without
   use of a despatcher. Inter panel communication is via CAN.
 - Door Operators - Suitable for all types of door operator
   AC, DC or manual/swing, with the option of selective doors.
 - Enclosure - IP54(min) Floor or wall mounted.
 - Operating voltage - Control circuit 240 or 110VAC.
   Pushbuttons, indicators etc 24VDC. Suitable for various
   brake, ramp and Valve Voltages. All inputs and outputs
   are fully opto-isolated.
 - Floor selection - Switched via shaft encoder, tapehead or
   proximity switches with terminal backup.
 - Indicators - Outputs for 24VDC Lift Coming or Call
   Accepted Indicators. Position Indicators and Direction
   Arrows. Hall lanterns and Arrival Gongs. Lift Here and Out of
   Service indication is optional. Gate open warning system for
   manual gate installations with 24VDC buzzer supply.
 - System Features - 110% overloaded with 24VDC output
   for indicator. 90% bypass, Homing, Fire Control,
   Firefighting Control, Service Control, Emergency Recall,
   Standby generator operation.

Skycom (advanced)  Skycom (advanced)

 - Fully programmable processor system via PC or keypad.
 - Rack based system using surface mount technology.
 - Powerful 16-bit processor allowing complex software
   routine to enhance the performance.
 - Comprehensive fault logging with trace recording.
 - Variable lift configurations and all boards are protected
   against mains and overvoltage.
 - Graphical LCD display allows display of lift position, door
   status, speed, direction, primary and safety circuits,
   call info, vane status and power status.
 - password protection system incorporating different levels
   for security.
 - Enter individual, all or patterns of calls from skycom.
 - Real time clock enhances event storage and allows time
   based features such as call reallocations at different
   times of the day.
 - Local remote monitoring system can provide selected
   programmability and graphic representation of the lift
   via a PC or laptop.
 - Despatcherless group system, using soft master/slave
   architecture.
 - Direct serial communication to drives and direct to floor
   control.
 - Adjustment of slowing distances/floor levels.
 - Integral shaft encoder for high rise/high speed applications.